Writing a successful blog about beer is probably contingent on the following two things. a) Having something to say. I'm not sure I'm there yet, recipes can be a bit dull so I'll try and find an angle as the blog progresses. b) You actually know what you are talking about. Having had a few infections that have irritatingly coincided with the start of the blog, my ability to be convincing in this regard is diminished. I thought I'd get aggressive with my equipment sanitation. On the bright side it means I can show my equipment a bit, just in case I become internet famous and people care.
Essentially I do electric BIAB in a self built boiler/masher. It has a kettle type element, and a 1/4" bsp ball valve in the bottom. See lovely pic. I used a hole cutter to make the holes, which is a wonderful tool that did the job really well. Unfortunately first I had to make a small hole through which to insert the threaded part of the cutter. This took the best part of a week of evenings with a step drill bit. Not something I recommend.
To clean most parts I just fired (powered) up the boiler with plenty of water and boiled everything. Fermenter lids, bottling wand components, the only airlock not in use. At the moment I have two 10 l plastic bucket fermenters, one for bottling. and a 25 l wide neck plastic fermenter. The buckets aren't really airtight, so if I do a big batch or am paranoid about oxygen I use the big one. After some boiling, the small parts got a soak in vodka (esp things that didn't get long due to dubious heat resistance). Now I keep chemicals, bottle tops etc in sealed plastic containers. The water was then emptied (boiling) into the two bucket fermenters, one has a tap for bottling, so the boiling water was run through this. They were both left to stew for a bit. My thinking was the heat would get anything lurking in any scratches that chemicals would miss. The large fermenter (definitely infected last time) was sanitised with sanitiser, Rinsed with boiling water, filled with salt water, rinsed again and sprayed with vodka, which was then diluted with water with more sanitiser, before being rinsed again with more boiling water.
No comments:
Post a Comment